< >

Automatic disc granulator

1. The automatic disc granulator can make the material roll and agglomerate continuously in the disc by controlling the rotation and tilt angle of the disc.

2. The parameters such as the disc speed, material addition amount and water spray system can be accurately controlled to ensure the uniform particle size of the produced particles.

3. During the granulation process, the material is uniformly squeezed and rubbed in the disc, making the internal structure of the particles compact and having high strength and hardness.

4. The automatic disc granulator adopts an automated control system, which can realize continuous feeding, granulation and discharging, and can operate stably for a long time.

5. According to production needs, the parameters such as the disc speed, diameter, tilt angle and material supply amount can be adjusted.

Contact Now E-Mail Telephone WhatsApp

Product Details

The disc part is the core component of the granulator and is usually made of high-strength wear-resistant materials, such as steel plate or cast iron, to withstand the friction and impact of the material.

圆盘造粒机1.jpg The transmission device includes a motor, a reducer, a coupling and a transmission shaft, etc., which are used to drive the disc to rotate. By adjusting the speed of the motor and the transmission ratio of the reducer, the speed of the disc can be accurately controlled to meet the needs of different materials and granulation processes.

圆盘造粒机2.jpg

The water spray system consists of a water tank, a water pump, a nozzle, etc. It can accurately control the water spray volume and angle according to the characteristics of the material and the granulation requirements, so that the material can evenly absorb water or binder in the disc to promote the formation and growth of particles.

圆盘造粒机3.jpg

The scraper device is installed on the edge or inside of the disc to scrape off the material attached to the disc wall to prevent material accumulation and ensure the normal operation of the disc and the granulation effect.

圆盘造粒机4.jpg The inclination angle of the disc can be adjusted to change the movement trajectory and residence time of the material in the disc to meet the granulation needs of different materials and improve the quality and efficiency of granulation.