Roll extruding granulator

The new type of roller extrusion pelletizing machine is driven by the motor belt and pulley, transmitted to the drive shaft through the reducer, and works synchronously with the passive shaft through the open gear, and achieves uniform pelletizing through the abrasive extrusion molding, demoulding granulation, crushing and separation. Extrusion abrasives are carefully forged with excellent anti-corrosion wear-resistant materials. The shape and size of the ball and socket on the roll can be seen by the user. There is a wide range of choices for the roller extrusion granulator. The ball shape has pillow shape, half-round grain shape, rod shape, pill shape, walnut shape, flat ball shape and square shape. The roller extruded granulator is produced without drying at room temperature and is formed once.

The feed port is equipped with a stirring device to effectively ensure uniform feed speed.

The main frame of the box oil self-cleaning device, textile material adhesion roll.

Roll clearance adjustment adopts step by step shift adjustment to ensure smooth clearance and easy operation.

The alignment of the roll skin is adjusted by the internal spline of the gear to ensure that the alignment is neat and good.

The pellet formation rate is above 95%, and the granularity is good.

The finished particles do not need to be dried twice and are produced at room temperature with low moisture content.

One extrusion molding, high production efficiency.

Various shapes and sizes of product particles are available.