Organic Fertilizer Disc Granulator
1. Through the reasonable design of disc angle, rotation speed, etc., the material can be fully rolled and agglomerated in the disc.
2. The size and shape of the particles can be accurately controlled, and the particle size of the organic fertilizer particles produced is uniform.
3. The particles produced have a certain compressive strength and are not easy to break or pulverize during transportation and storage.
4. The operation interface of the equipment is simple and intuitive, and the operator can master the operation method after simple training.
5. The design is flexible, which can not only carry out intermittent production according to actual production needs, but also realize continuous and uninterrupted operation.
The frame is usually welded with high-quality channel steel to provide support for the transmission part and rotating working part of the entire equipment and can withstand greater forces.
The granulation is uniform, the particle shape is regular, and the ball formation rate can reach more than 93%. The size and shape of the particles can be accurately controlled by adjusting the parameters such as the disc speed, inclination angle, material humidity, etc.
The operating interface of the equipment is simple, and operating parameters such as disc speed and inclination can be easily adjusted through the control panel.
The reducer and motor are driven by flexible belts, which can start smoothly and reduce impact force. The thickened, heavier and stronger base design allows the equipment to run smoothly without anchor bolts.
It can process a variety of organic wastes that have been fermented, such as livestock and poultry manure, straw, sludge, and kitchen waste. It has a certain adaptability to the humidity of the raw materials. Generally, the raw material humidity between 20% and 40% can be granulated well.
The granulating plate adopts an overall arc design, and the granulation rate can reach more than 93%. The bottom of the plate is reinforced with multiple radiating steel plates, which is strong, durable and non-deformed.
The adjustment part is generally welded by carbon steel plate and channel steel, which is used to install the granulation disk, bear the entire center of gravity of the granulation disk, and ensure that the granulation disk can work stably.
