Horizontal drying box for steam corn tablet press production line

1. Parting box: It is composed of bending steel plate with parting plate inside, and the steel plate material is 201 stainless steel;

2. Cloth box: A box composed of 201 stainless steel plate welded, with a cloth plate inside, the Angle can be adjusted, the cloth plate is 201 stainless steel; External positioning handles, splints and reinforcement channels are made of carbon steel;

3. Head box: The head box is a frame structure welded by section steel with a length of 2200mm. The section steel, support plate on both sides and material pallet are made of high-quality carbon steel, while the material pallet, blanking platform and chain pallet are all 201 stainless steel.

4. Central box: the central box has seven sections, each length is 2100mm, the outside and top plate are made of 201 stainless steel bent combination, the ventilation plate and chain plate of the inner supporting material are 201 stainless steel, and the support below and above the ventilation plate are made of carbon steel. Both sides are provided with observation holes and access doors; Three of the boxes are equipped with temperature transmitters connected to the central control room to monitor the temperature of the material.

5. Tail box: The tail box is a frame structure welded by section steel, with a length of 2200mm. The section steel and the supporting plate on both sides, the material plate below and the discharge port are made of high-quality carbon steel, while the material plate and the bending plate of the chain are all 201 stainless steel;

6. Transmission device: transmission system is composed of decelerating motor, driving sprocket group, chain, driven sprocket group, decelerating motor and driving sprocket group fixed on the tail box, driven sprocket group fixed on the head box. The chain and gear motor are purchased parts, the cleats of the chain are made of 201 stainless steel, and the pins and rollers are made of high alloy wear-resistant materials; The sprocket is made of 40Cr alloy steel after quenching treatment, and the sprocket shaft is tempered with 45 steel.

7. Hot air system: It is composed of air preheater, ventilation duct, hot fan, damper device and outlet nozzle. The outlet nozzle is connected with the lower part of the head box, and the hot air is blown into the drying box to heat the material to dry and gelatinize the material. Air preheater and fan are made by professional manufacturers, and the production standard is subject to professional manufacturers; The rest is made of section steel and steel plates, all of which are made of high-quality carbon steel.

8. Cold air system: composed of fan, damper device and outlet nozzle. The outlet nozzle is connected with the lower part of the tail box to blow the cold air into the drying box to cool the material. The fan is made by professional manufacturers, and the production standard is subject to professional manufacturers; The rest is made of section steel and steel plates, all of which are made of high-quality carbon steel.