Stone Removing Machine

Stone Removing Machine Working principle

The blow specific gravity stone removal machine is based on the difference in the specific gravity of crops and stones in the material, by adjusting the wind pressure, amplitude and other parameters, so that the larger proportion of stones sunk to the bottom close to the screen surface from low to high movement, and the smaller proportion of crops suspended on the surface from high to low movement, so as to achieve the purpose of separation.

Product advantage

1, large output: large table design, greatly improve the stone output;

2, high configuration: stone table using 304 food grade stainless steel woven mesh, extend the service life;

3, the stone outlet increases the function of backblowing, effectively reducing the ratio of materials in the stone;

4, sheet metal parts using imported laser cutting, to ensure accuracy; The whole machine is bolted to avoid welding deformation.

Scope of application

It can be adjusted by frequency and air volume, and is suitable for stone removal of different products such as small particle materials (millet, sesame), medium particle materials (mung beans, soybeans), large particle materials (kidney beans, broad beans).

It is suitable for the selection of single purpose materials, and can effectively remove heavy impurities such as side stone in the material (sand and stone with similar particle size of the material). In the grain processing process should be installed in the screening process after the process, without the removal of large, small, light impurities of raw materials, should not be directly into the machine, to avoid affecting the stone effect.